- plans/: mark Slate AX → SODOLA migration as Done (2026-06-02) - infrastructure/network.md: rewrite to reflect actual topology — Fritz!OS 8.x lacks second-IP-network support, so Proxmox routes between vmbr1 (192.168.178.10, uplink) and vmbr0 (192.168.8.x, internal portless bridge with 192.168.8.1 alias). Static route on Fritz!Box, no NAT on Proxmox. Technitium DHCP enabled for 192.168.8.100–240 (gateway .1, DNS .2). Caddy service unit was missing on CT 121 — recreated and enabled. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
4.0 KiB
Network
Physical and logical network topology for the homelab.
Why
The homelab runs on a dedicated internal subnet (192.168.8.0/24) isolated from the main household LAN (192.168.178.0/24). Isolation is enforced at Proxmox: LXC/VM traffic is bridged only on the internal vmbr0 bridge; Proxmox routes packets out to Fritz!Box via vmbr1. The main LAN cannot reach homelab services directly without a Fritz!Box static route (which is configured to allow inbound).
Fritz!OS 8.x does not support second IP networks on LAN ports, so Proxmox (hubris) acts as the subnet router rather than the Fritz!Box.
Hardware
| Device | Role |
|---|---|
| Fritz!Box 7590 | Main router / ISP gateway (192.168.178.1) |
| SODOLA 5-Port 2.5Gbit Managed | Homelab switch — flat L2, all ports native |
| hubris (Proxmox) | Subnet router — routes between 192.168.8.0/24 and 192.168.178.0/24 |
Topology
ISP
└── Fritz!Box 7590 (192.168.178.1)
│ static route: 192.168.8.0/24 → 192.168.178.10
│
└── SODOLA 5-Port 2.5Gbit
├── Port 1 uplink → Fritz!Box LAN
├── Port 2 hubris eno1 → vmbr1 (192.168.178.10)
├── Port 3 [device]
├── Port 4 [device]
└── Port 5 spare
hubris internal bridges:
vmbr1 192.168.178.10/24 eno1 (uplink, DHCP-reserved) gateway 192.168.178.1
vmbr0 192.168.8.77/24 no physical port (internal)
192.168.8.1/24 alias — LXC default gateway
├── all 16 LXCs
└── HAOS VM
Subnets
| Subnet | Gateway | Purpose |
|---|---|---|
192.168.178.0/24 |
192.168.178.1 |
Household LAN — laptops, phones, Fritz!Box DHCP |
192.168.8.0/24 |
192.168.8.1 (Proxmox vmbr0 alias) |
Homelab — all LXCs and VMs |
DHCP
- Household (
192.168.178.x): Fritz!Box built-in DHCP. Proxmoxvmbr1has a reservation: MAC84:47:09:6b:e7:58→192.168.178.10. - Homelab (
192.168.8.x): Technitium on CT 107 at192.168.8.2. Range192.168.8.100–192.168.8.240, gateway192.168.8.1, DNS192.168.8.2.
Most homelab LXCs use static IPs below .100. DHCP only covers new/transient containers.
DNS
Split-horizon DNS for *.hubris.network served by Technitium on CT 107 at 192.168.8.2:53. See dns.md for full detail.
Routing
Proxmox has net.ipv4.ip_forward=1 (already enabled by PVE). Packets from LXCs on vmbr0 destined for the internet exit via vmbr1 → Fritz!Box. Fritz!Box masquerades all outbound WAN traffic. Fritz!Box has a static route (192.168.8.0/24 → 192.168.178.10) so return traffic reaches the LXCs.
No NAT on Proxmox — traffic flows without double-NAT.
Remote access
- NetBird mesh — primary path for remote administration. Authenticated via Authentik on the VPS.
- Tailscale — legacy, being phased out. See mesh.md.
Related
- DNS — split-horizon config and entry list
- Ingress — public entry points via VPS traefik
- Mesh — NetBird / Tailscale VPN overlay
- hosts/hubris.md — Proxmox host (vmbr0/vmbr1 config)
- CT 107 — dns — Technitium DNS + DHCP server
Changelog
2026-06-02 — Executed migration; Proxmox as subnet router
Fritz!OS 8.x does not support second IP networks on LAN ports, so the final design uses Proxmox as the router: vmbr1 (eno1 → SODOLA → Fritz!Box) is the uplink at 192.168.178.10; vmbr0 is a portless internal bridge with 192.168.8.1 alias as the LXC gateway. Technitium DHCP enabled for 192.168.8.100–240. Caddy service unit was missing and recreated. See migration plan.
2026-06-01 — Initial network doc; Slate AX retired; SODOLA switch added
Replaced the GL.iNet Slate AX sub-router with the SODOLA 5-Port 2.5Gbit managed switch. Eliminated double-NAT. See migration plan.