The left sidebar can now create, rename, and delete folders. Each
operation is mirrored to disk through the backend.
Backend (folders router):
- POST /folders { name, parent_id } — create a sub-folder under an
existing Folder row, mkdir on disk, insert the row, return it. Names
are validated (no separators, no traversal).
- PATCH /folders/{id} extended — still does the display-only rename for
SourceRoot ids, but for Folder ids it now actually moves the directory
on disk and rewrites every descendant Folder.path + Photo.filepath
that lived under the old prefix in a single transaction. Refuses to
rename the source-root mount itself.
- DELETE /folders/{id}?mode=discard|permanent —
discard: set is_discarded on every photo whose filepath lives under
this folder. The folder, descendants, and on-disk dir are
left intact. Recoverable from the discard pile.
permanent: unlink each file, remove rows, rmtree the directory.
- Refuses to delete the source-root mount in either mode.
Frontend:
- New DeleteFolderDialog: two-card mode picker (Move to discard pile /
Permanently delete) with destructive accent on the latter. Esc and
backdrop click cancel.
- LeftSidebar: hover-revealed kebab menu on every folder row with
New sub-folder, Rename, and Delete folder… Inline create input
appears below the parent row when "New sub-folder" is picked.
All mutations invalidate ['folders'], ['photos'], and the library
stats query so the sidebar counts stay live.
- api.ts: sourceFolders.create + sourceFolders.delete wrappers.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- FilterPill: drop the inline value text from the active state. Pills
now stay the same width whether or not a filter is set; the popover
is the canonical place to read the value, and the title attribute
surfaces it on hover.
- TopBar: remove the search input — search lives in the filter bar now.
- FilterBar: add a search input on the left, with the pill cluster
centered between it and a flex-shrink-0 Clear-all on the right.
- LeftSidebar / HeapsPanel: count badges use a fixed-width slot
(h-5 min-w-[24px], tabular-nums) so counts line up in the same
visual column across rows. Empty rows reserve the slot.
- LeftSidebar: pull section counts (All Photos, Rated, Duplicates,
Discarded) from a new useLibraryStatsQuery hook backed by the
expanded /library/stats endpoint. Tags count was already wired.
- backend/library: stats endpoint returns per-section counts that
match the filter the sidebar applies on click.
- Stats invalidation hooked into the standard photo-mutation paths.
- RightSidebar header: h-12 to match TopBar height.
- Timeline sticky date overlay: only show once the natural in-grid
header has scrolled OUT of the viewport. Avoids the duplicate-label
flash when both labels would be visible.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The heap row used to fan out three small icon buttons (set active, convert
to folder, delete) on hover, which crowded the row and didn't leave room
for new actions. Collapse the destructive / occasional ones into a kebab
menu and add the missing operations.
- Right-aligned action cluster: active indicator → count badge → target
toggle (when not active) → kebab menu, all flex-shrink-0 so the name
truncates first.
- Kebab menu items: Rename, Duplicate, Move to folder…, Delete. Outside
click and Escape close the popover; the trigger has aria-haspopup +
aria-expanded. Delete still confirms via window.confirm.
- Inline rename: double-click a heap row OR pick Rename from the menu
to edit the name in place. Enter commits, Escape cancels. Mirrors the
folder rename pattern in LeftSidebar.
- backend: new POST /heaps/{id}/duplicate creates a copy with the same
membership ("{name} (copy)") via INSERT...SELECT on heap_photos.
Never marks the new heap as active so duplicating doesn't quietly
steal the user's T-key destination.
- api.ts: heaps.duplicate wrapper.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The CORS allowed-origins list, host port mappings, log level, container
timezone, and worker concurrency are now all driven by environment
variables with sane defaults. Same-origin access through the nginx
proxy keeps working with no config; direct cross-origin backend
access can be locked down via ALLOWED_ORIGINS.
- backend/config: ALLOWED_ORIGINS env (comma-separated, "*" for any)
exposed via settings.cors_origins. LOG_LEVEL too.
- backend/main: build the CORS middleware from settings.cors_origins,
auto-disable allow_credentials when origins is wildcard (CORS spec
forbids credentials + "*").
- docker-compose: parameterize FRONTEND_PORT, BACKEND_PORT, REDIS_PORT,
CELERYD_CONCURRENCY, LOG_LEVEL, and TZ via ${VAR:-default} so each
has a working fallback if the .env entry is missing.
- .env.example: new template documenting every knob with examples.
- .env: pruned to only the values that diverge from .env.example;
removed dead VITE_API_URL.
- README: configuration knobs table + "accessing from another machine"
section explaining the same-origin proxy story.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- api.ts: switch baseURL from http://localhost:8001/api/v1 to relative
/api/v1. Both nginx (prod) and vite (dev) already proxy /api/ to the
backend, so requests become same-origin and the app works from any
host (LAN IP, reverse proxy, another machine) with no CORS dance.
- backend CORS: open to "*" as a fallback for the rare direct-hit case;
the normal flow is same-origin via the proxy and never touches CORS.
- App layout: move FilterBar and DiscardActionBar inside the main
content column (right of the left sidebar) so the filter row no
longer bleeds across the sidebar.
- FilterBar: justify-center the pills so they sit centered above the
timeline. Clear-all uses ml-2 instead of ml-auto.
- KeyboardHints: convert to a floating, glassy pill pinned bottom-
center (fixed positioning + backdrop-blur + ring) instead of a flat
toolbar row. Removed from the column layout — now mounted as an
overlay sibling.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The bulk action panel previously covered rating, color, flag, and pick
but had no way to apply tags across a multi-photo selection — the only
path was to tag photos one at a time via the single-photo PhotoInfoPanel.
Add it.
- backend: extend the existing /photos/bulk action endpoint with
add_tags and remove_tags actions. add_tags is idempotent (computes
the new (photo_id, tag_id) pair set against existing rows and inserts
only the missing ones); remove_tags is a single DELETE WHERE IN.
- api.ts: bulkAddTags / bulkRemoveTags wrappers.
- RightSidebar: new BulkTagsEditor below the bulk flag row. Filters /
searches the existing tag list, lets the user click any chip to apply
it to the whole selection or X to remove it. Typing a name with no
exact match shows a "Create and apply" button that creates the tag
via tagsApi.create and immediately attaches it to every selected
photo. All three mutations invalidate both the photo and tag caches
so the FilterBar tag count + sidebar Tags section stay fresh.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- backend/photos: collapse the per-tag subquery loop in the tag filter
into a single GROUP BY ... HAVING COUNT(DISTINCT) = N subquery so the
cost is independent of how many tags the user is filtering on.
- useFilterUrlSync: type the parseUrl return value as
Partial<FilterState> & { currentSection?: string } so the section field
doesn't need an (out as any) cast.
- Timeline sticky header: bump opacity, padding, and border so it reads
more clearly against the underlying grid.
- FilterPill clear: convert the nested <button> (invalid HTML — buttons
cannot nest) to a span with role=button + keyboard handler, with a
larger hit area.
- RightSidebar: add aria-label to the close-X buttons so screen readers
announce them.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- backend/photos: whitelist sortable columns instead of getattr(Photo, sort).
Previously any client-supplied string was passed to SQLAlchemy, exposing
every Photo attribute (filepath, file_hash, etc.) as a sort target.
- App: move the auto-show-right-sidebar logic out of the render body and
into a useEffect. The previous version called setState during render,
causing extra re-render passes the audit caught.
- types/photo: add added_at and tighten folder_id from optional to nullable.
Drops a (photo as any).added_at cast in Timeline.
- constants/colorLabels: extract a single COLOR_LABEL_OPTIONS used by
FilterBar, RightSidebar, and PhotoInfoPanel. filterStore re-exports the
ColorLabel type so existing imports keep working.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Discarded photos now look discarded in the grid (50% opacity + grayscale)
with a red trash badge in the corner instead of a bare icon. The discard
action bar gains a "Delete N" button that permanently deletes only the
current selection, complementing the existing "Empty discard pile".
Backend: new DELETE /discard endpoint accepting {photo_ids: [...]} that
permanently removes only listed photos. Skips ids that aren't in the
discard pile so it can never bypass the soft-delete safety net.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The sidebar showed Juno=7 and sub=blank because the scanner's
folder.photo_count bookkeeping is broken end-to-end:
for root, dirs, files in os.walk(folder_path):
folder = await get_or_create_folder(...)
...
processed_files += 1 # global counter
# AFTER the loop:
folder.last_scanned = datetime.utcnow()
folder.photo_count = processed_files # only the LAST folder
processed_files is the running total across the whole walk, not
per-folder; and the assignment runs once after the loop, only on
whichever folder os.walk happened to visit last. Result: that folder
gets the grand total, every other folder gets nothing (or stale).
Rather than fix the scanner's bookkeeping (which has leaked into
two production scans already), the tree endpoint now computes
counts on demand from the photos table:
- One GROUP BY per source root: photo.folder_id → COUNT, excluding
discarded
- Each node starts with its DIRECT count
- A post-order walk accumulates descendants so every node reports
recursive count — i.e. clicking the row gives you that number of
photos because the photos query also expands descendants
The stored Folder.photo_count column is now unused by the API. A
future cleanup could drop it from the model entirely.
Verified on the dev DB: Library=7 (4 direct + Juno=2 + sub=1),
Juno=2, sub=1.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Diagnosis: every backend restart was dispatching watch_folders.delay()
unconditionally. watch_folders is an infinite-loop celery task
(for changes in watch(*paths)). With CELERYD_CONCURRENCY=4 and several
restarts during dev, all four worker slots ended up pinned by stale
watch_folders instances, leaving zero workers free for scan_folder.
The result: clicking "Scan all folders" successfully queued a task
that then sat in the queue forever, the new /photos/sub folder was
never walked, and the user's newly added photo never appeared.
The watcher was only opportunistically useful and the user already
triggers scans manually. Disabling it removes the foot-gun. Re-
enabling needs:
- a Redis lock so only one watcher runs at a time
- or a dedicated long-running container with concurrency=1
- or a celery beat schedule with a singleton flag
Until then, manual scans work. Cleared the backlog by wiping the
redis broker volume so the stale watch_folders tasks are gone.
Verified: post-fix, scan_folder runs in 0.12s and reports
"Processed 7/7 files. Errors: 0", picking up the previously missing
/photos/sub/Samuel_Colman... file.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Reworks the Tags sidebar entry from an expandable list of tags into a
single leaf entry. Clicking it switches the timeline grouping mode to
"tag" — every tag becomes a sticky-headered group, with an "Untagged"
group at the bottom for photos with no tags. A photo with N tags
appears in N groups. Existing filters and sort still apply within each
group.
Backend
- list_photos eagerly loads Photo.tags via selectinload to avoid an
N+1 round-trip.
- Each photo in the list response now carries a `tags: [{id, name,
color}]` array. The route stops using PhotoListResponse strict
validation (returns a plain dict with the same shape plus the new
field) so we don't have to extend the pydantic schema.
Frontend
- Photo TS type gains an optional tags field plus a PhotoTagSummary
alias.
- filterStore: new groupBy: 'date' | 'tag' field, default 'date',
with setGroupBy + URL sync via ?group=tag. clearAll resets it.
- usePhotosQuery threads groupBy through filtersToParams (it's
client-side only but kept in the params for cache key
consistency).
- LeftSidebar Tags entry is now a leaf node (no children), shows the
total tag photo count as the badge, and is highlighted when
groupBy === 'tag'. Click → setGroupBy('tag') without touching
other filters. Selecting "All Photos" resets groupBy back to
'date' via clearAll.
- Timeline.buildItems gets a third "tag" branch:
- Iterates photos × tags into per-tag buckets
- Photos with no tags go into an "Untagged" bucket
- Tag groups sorted alphabetically; Untagged pinned to the end
- Headers + rows pushed in the same shape the date branch uses,
so the existing sticky-header overlay works for free
- Selection state is by photo id, so a photo appearing in multiple
groups stays consistently selected/highlighted across instances.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The Folders section in the LeftSidebar previously rendered the flat
list of source roots — actual subdirectories were invisible. Now it
shows the full nested tree, click any node to filter, drop targets
work at every depth.
Backend
- New GET /folders/tree returning a list of root nodes (one per
active SourceRoot). Each node is { id, name, path, photo_count,
children: [...] } with children sorted alphabetically at every
level. Walks Folder rows whose source_root_id matches and whose
path is at or beneath the source root, then attaches them by
parent path so partial scans don't break the tree.
- The source root's display label is overlaid on the root folder
node so the top-level entry reads as "Library" instead of
"/photos".
- list_photos folder_id filter now does descendant matching: when
a Folder id is given, it includes the folder itself and every
Folder whose path is a sep-prefixed descendant. Matches the
Lightroom mental model: clicking "Library" or any parent folder
shows everything beneath it. The existing source-root-id branch
is unchanged.
Frontend
- New types/api.ts FolderTreeNode interface and sourceFolders.tree()
helper.
- New hooks/useFolderTreeQuery.ts with a 30s staleTime and a
findFolderInTree() walker for id-based name lookups.
- LeftSidebar drops the flat foldersData list and uses the tree
query. folderNodeToTreeItem recursively maps backend nodes into
the existing TreeItem shape; renderTreeItem already knew how to
recurse into children, so the tree just works at any depth.
Drop targets, drag-to-move, drag-to-copy, double-click rename,
and active-state highlighting all carry over to nested folders.
- The renameMutation now also invalidates ['folders', 'tree'] so a
source-root rename refreshes the tree label immediately.
- ActiveFilterChips switches to the tree query and uses the new
findFolderInTree walker so the chip label resolves correctly for
sub-folder filters too — not just top-level source roots.
- The "Scan all folders" button visibility now keys off the tree
length instead of the flat folders length.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The previous /heaps/{id}/convert dropped photos directly into a chosen
source root, which is rarely what you want — Lightroom-style behaviour
is "make a folder named after the collection inside the library".
Now the dialog lets you do that.
Backend
- HeapConvertBody gains an optional subfolder_name field. Path
separators and dot-segments are rejected. When set, the handler
joins it onto the resolved parent_dir, mkdir's it if missing, and
uses the resulting path as the move/copy destination. Otherwise
the parent_dir itself is used (unchanged behaviour).
- The Folder DB row for the destination is created via the existing
scanner get_or_create_folder helper so dedupe + path normalization
stay consistent across the codebase.
- The target source root id is propagated through both the source-
root and folder branches so the new Folder row is correctly
parented when subfolder_name is set on a folder target too.
Frontend
- HeapConvertDialog grows a "Subfolder name" input that prefills
with the heap name when the dialog opens. Trimmed empty value
drops directly into the parent. A live hint below the input
shows exactly which path will be created (or that the parent
will be used).
- api.ts heaps.convert() signature accepts an optional
subfolder_name field; the dialog sends it via mutationFn.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Two related polish items.
1. Heap convert to folder
Closes a long-standing TODO from spec §6.10.
- Backend: POST /heaps/{id}/convert with body
{ target_id, mode: 'move'|'copy', delete_heap: bool }
target_id resolves either as a Folder id or a SourceRoot id (same
convention as /photos/move). For each member photo, dispatches
either shutil.move + photo.folder_id update, or shutil.copy2 +
a new is_duplicate=true Photo row with all metadata copied. Name
collisions on copy use the same " (copy N)" suffix scheme as
/photos/copy. The heap row is optionally deleted on success.
Per-photo failures are collected into the response instead of
aborting the batch.
- Frontend: new HeapConvertDialog with a target-folder dropdown
(currently from sourceFolders.list, sub-folder picking is a
follow-up), move/copy radio, and a "delete heap" checkbox.
HeapsPanel rows get a hover FolderOutput button that opens it.
Toast on success names the verb + count and notes whether the
heap was deleted; invalidates heaps + photos + folders queries.
2. Surface exact-duplicate detection
The scanner already sets Photo.is_duplicate=true when a SHA-256
match is found, but nothing surfaced it. Now:
- Backend list_photos accepts an optional is_duplicate query
param so the frontend can filter duplicates-only views.
- filterStore gains a duplicates: boolean field with setter, URL
sync (?duplicates=true), filtersToParams entry, and a
hasActiveFilters check.
- LeftSidebar gets a new "Duplicates" library node (Copy icon)
that clearAllFilters() + setDuplicates(true). isItemActive
follows the filter so the highlight stays in sync after
external filter changes.
- PhotoThumbnail renders a small dark badge with the Copy icon
bottom-right when photo.is_duplicate. Sits next to the existing
basket / discard badges so the user can spot duplicates at a
glance.
- Photo TS type adds is_duplicate.
Perceptual-hash duplicate detection (re-encoded / resized matches)
is intentionally a follow-up — needs an imagehash dep, a phash
column, a backfill job, and similarity-search endpoint with
hamming-distance grouping. This commit only surfaces what the
scanner already finds via byte-level SHA-256 comparison.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The Tag model and photo_tags join table were already in place; this
fills in the rest — full backend CRUD, per-photo add/remove, list-
endpoint filtering, and a Tags section in the RightSidebar with
autocomplete-create.
Backend
- routers/tags.py rewritten from a 27-line stub:
GET /tags — list with photo counts
POST /tags — create (idempotent on name)
PATCH /tags/{id} — rename / recolor
DELETE /tags/{id} — delete (FK cascades photo_tags)
- routers/photos.py:
POST /photos/{id}/tags — add tag ids (idempotent)
DELETE /photos/{id}/tags/{tag_id} — remove
GET /photos/{id} — now returns a `tags` list alongside
the existing PhotoResponse fields
(fetched via the photo_tags join)
- list_photos applies the existing tag_ids query param: comma-
separated, AND semantics, one IN-subquery per id since SQLite
has no native set-contains-all.
Frontend
- New hooks/useTagsQuery.ts.
- services/api.ts: Tag interface, full tags client (list/create/
update/delete), addToPhoto/removeFromPhoto helpers.
- filterStore: tagIds: string[] field, setTagIds, toggleTagId,
hasActiveFilters update, filtersToParams sends tag_ids comma list.
- useFilterUrlSync round-trips ?tag_ids=… so tag-filtered views
are bookmarkable.
- usePhotosQuery threads tagIds through.
- RightSidebar gains a new Tags section using a TagsEditor
component:
- shows existing tag chips with X to remove
- autocomplete input that matches the user's typing against
existing tag names
- shows an inline "+ Create '<name>'" affordance when there's
no exact match
- Enter creates and attaches in one shot; Esc clears the input
- existing colour values render as a tinted chip background
- FilterBar gets a Tags group (only rendered when there's at
least one tag) with toggleable chips per tag.
- ActiveFilterChips shows "Tag: <name>" chips for each active
tag id, looking up names lazily from the tags query.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Three small phase-11 follow-ups in one commit since they all touch the
same surface area.
1. Watcher source-root resolution
The watch_folders task previously called scan_folder.delay(parent_dir)
when files arrived, with no source_root_id. scan_folder would then
auto-create a fresh SourceRoot for that arbitrary subdir, polluting
the source_root list. Now the watcher loads (path, id) pairs at
startup, defines find_source_root_for() that walks the parent chain,
and dispatches with the resolved id. Events under no known root are
logged at debug and ignored instead of creating stale rows.
2. Folder rename via UI
- Backend: PATCH /folders/{id} accepts { name } and updates the
SourceRoot display label only. The on-disk path is controlled by
the docker mount and intentionally not editable from the UI.
- Frontend: double-click a folder row in the LeftSidebar to start
editing; Enter or blur commits, Esc reverts. New renamingId /
renameDraft local state and a renameMutation that invalidates
['folders']. The click handler ignores clicks while the row is
in edit mode so it doesn't navigate.
- api.ts: new sourceFolders.rename(id, name) helper.
3. Bulk copy via Alt-drag onto folder
- Backend: new POST /photos/copy that mirrors /photos/move but uses
shutil.copy2 and creates fresh Photo rows with is_duplicate=true.
Name collisions are resolved by appending " (copy)", " (copy 2)",
etc., up to 100 tries before erroring. Same target_id resolution
as /move (folder id or source root id).
- Frontend: photos.copy(ids, targetId) helper. LeftSidebar's
handleDrop now takes a `copy` flag derived from e.altKey on the
drop event; folder targets dispatch copyDropMutation when held,
moveDropMutation otherwise. The drop-effect cursor flips to
'copy' on dragover when Alt is pressed so the user gets visual
confirmation. Discard target ignores the modifier.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Two related polish items.
1. Drop dead TopBar buttons
- Removed the hamburger menu (Tab already toggles the sidebar),
the grid/list view-mode toggle (only Grid was ever
implemented), and the FolderOpen / Upload / Settings action
icons (no features behind them).
- TopBar is now: logo + active heap pill | search | filter
toggle. Removed the now-unused Grid/List/Menu/FolderOpen/
Upload/Settings icon imports and the dead viewMode local
state.
2. Wire live scan progress
- The frontend ScanProgress widget was already polling
/api/v1/library/scan/status, but the worker never wrote the
Redis keys that endpoint reads — it only updated celery's
internal task state. So the progress UI was permanently idle.
- Worker now writes scan:active / scan:current_folder /
scan:processed_files / scan:total_files / scan:errors at
every meaningful step. _get_redis() returns None on failure
so a Redis outage degrades gracefully (scan still runs,
progress just doesn't show).
- Pre-walk computes total_files upfront — without it the
progress bar jumped every time os.walk discovered a new
subfolder because the running total was being updated as it
went.
- Errors are RPUSHed to a capped list (MAX_ERROR_ENTRIES=50)
so a noisy scan can't blow up Redis.
- finally: clause guarantees scan:active flips to false even
on a crash, so the UI never sticks at "scanning" forever.
- scan_all_source_roots clears scan:errors and resets counters
before queuing the per-root tasks, so each top-level scan
starts with a clean slate.
Two latent bugs caught and fixed in passing:
- watch_folders was still reading settings.source_roots which
no longer exists since we moved source roots to the DB. Now
it loads them from the DB via a synchronous one-shot async
wrapper at task startup.
- _scan_all_source_roots_async was missing entirely after the
last refactor — defined inline now, reads active source
roots from the DB and dispatches scan_folder per row.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The frontend AddSourceFolderDialog let users register source roots
from inside the app, but with the bootstrap auto-creating one for
the /photos mount on first boot, the dialog was redundant in the
common case and confusing in every other (users had to know which
container path corresponded to their host directory). Going
config-driven matches Plex/Photoprism/Immich and matches the
mental model "the docker mount IS the library".
Frontend
- Deleted components/dialogs/AddSourceFolderDialog.tsx entirely.
- LeftSidebar drops the "+ Add Source Folder" button + bottom-bar
layout, the addFolderMutation, the dead Plus action button on
the (no-longer-existing) folders/heaps tree headers, and the
Plus icon import.
- api.ts: removed sourceFolders.add(), library.browse(), and the
BrowseChild / BrowseResponse types. The remaining sourceFolders
surface is read-only (list + manual scan).
- LeftSidebar bottom strip is now just the "Scan all folders"
button when there's at least one source root.
Backend
- Dropped POST /folders (no consumers) along with FolderCreate /
FolderResponse pydantic models. The folders router header now
documents the config-driven approach.
- Dropped GET /library/browse (no consumers). Removed the unused
os/HTTPException/SourceRoot imports it brought in.
- cleanup_data_integrity now also walks the source roots and logs
a warning for any whose path is missing on disk. Doesn't auto-
delete (a missing path could be a temporarily unmounted drive)
but surfaces enough hint to fix it. Returns the count in the
summary dict alongside merged-duplicates.
Docs
- README "How libraries are managed" section rewritten to spell
out that mounts ARE source roots, edit .env + restart, no UI for
managing source roots. New "Changing or adding libraries"
section walks through the typical edit-restart loop including
the optional volume-nuke for a clean slate.
- "Adding more libraries" subsection covers multi-mount via
edited compose with a note that auto-registration is roadmap.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Cleans up the maze of overlapping ways folders entered the app, plus
removes the dead trash plumbing left over from the soft-discard
refactor.
Setup model (now)
- ONE env var: PHOTO_DIRS in .env, set to the host path of your
library. Compose mounts that at /photos. That's the entire setup.
- On first boot, the backend auto-creates a SourceRoot row named
"Library" pointing at /photos so the user sees their photos
immediately without configuring anything.
- Source roots and discard live in the database; mulita.yml only
carries operational settings (thumbnails, scanner, performance).
- The "Add Source Folder" dialog is now a directory browser
restricted server-side to /photos and any existing source root —
the user clicks through actual mounted directories instead of
typing container paths they can't possibly know.
Backend
- New services/scanner.bootstrap_default_source_root(): if no
SourceRoot rows exist and /photos is mounted, create one. Wired
into the lifespan handler before cleanup + initial scan.
- New GET /library/browse?path= returning the immediate child
directories of `path`, validated to live under one of the allowed
roots (default mount + every active SourceRoot). Hidden entries
are filtered. Children are tagged with is_existing_root so the UI
can show an "Added" badge. Returns parent path for up-nav, or
null when at the top of the allowed scope.
- scan_all_source_roots now reads from the DB instead of the YAML
config so DB-managed source roots are honoured by initial scan.
- Dropped the placeholder source_roots block from mulita.yml — the
paths /photos/main and /photos/iphone never existed and just
produced startup warnings.
- Dropped TrashSettings, settings.trash, settings.source_roots,
and the SourceRoot pydantic model from config.py. Soft discard
has owned this for a while; it was dead code.
Compose
- Single ${PHOTO_DIRS:-./photos}:/photos:rw mount in both backend
and worker.
- Removed the hardcoded ~/Pictures:/host/Pictures:rw mount — the
PHOTO_DIRS variable is the single source of truth now.
- Removed the trash_data named volume + mounts (no consumers).
- backend/Dockerfile no longer creates /data/trash; it now creates
/data/proxies (which the proxy endpoint actually uses).
Frontend
- AddSourceFolderDialog rewritten as a directory tree picker:
loads /library/browse on open, lets the user navigate up via a
ChevronUp button or down by clicking subfolders, shows the
current path inline, and adds whatever directory is currently
shown. Existing source roots are tagged "Added" so the user
knows what's already registered. Errors from the backend (e.g.
trying to navigate outside the allowed scope) surface inline.
- New library.browse() helper + BrowseChild / BrowseResponse types
in services/api.ts.
Docs
- README Quick Start rewritten around the single PHOTO_DIRS env
var, with macOS/Linux/Windows examples.
- New "How mounted folders and source folders relate" section that
spells out the two-layer model (mount = visibility, source root
= scanning) so the most common confusion is addressed up front.
- Added a "Read-only libraries" subsection that lists exactly which
endpoints fail under :ro.
- "Configuration" section reframed: source roots are managed by the
UI/API now, mulita.yml is operational settings only.
- .env file now has examples for the common host paths.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Tried it, didn't add value beyond what the date-grouped timeline
already gives. The grouped, sticky-headered timeline (which kicks
in by default whenever sortBy is taken_at) is the better
affordance for date navigation — duplicating that as a sidebar
drilldown was just clutter.
Removes the full stack:
- LeftSidebar: by-date tree node, byDateChildren computation,
date-year-/date-month- handlers in applyLibraryNode, isItemActive
branches that matched a date-range filter, the now-unused
setDateFrom/setDateTo/filterDateFrom/filterDateTo selectors, and
the Calendar icon import.
- frontend/src/hooks/useDateBucketsQuery.ts deleted entirely.
- api.ts: library.dateBuckets helper and DateBucketYear/Month types.
- backend/app/routers/library.py: GET /library/date_buckets endpoint
and its strftime aggregation query.
The dateFrom/dateTo filter state stays in filterStore — the
FilterBar still uses it for the "Date" range inputs.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The "By Date" library node was decorative. Now it's a real
hierarchical navigator: expand to see year buckets (with photo
counts), expand a year to see its months, click any year or
month to filter the timeline to that date range.
Backend
- New GET /library/date_buckets aggregates non-discarded photos
by year+month from Photo.taken_at via SQLite strftime, returning
[{ year, count, months: [{ month, count }] }] sorted newest-
first. NULL taken_at rows are excluded.
Frontend
- New library.dateBuckets() helper + DateBucketYear / Month types.
- New hooks/useDateBucketsQuery.ts with a 60s staleTime.
- LeftSidebar builds the By Date subtree dynamically from the
query: each year is a tree node with month children. Year nodes
use the Calendar icon, months render as their full English name.
- applyLibraryNode handles two new id prefixes:
'date-year-{year}' → setDateFrom YYYY-01-01, setDateTo YYYY-12-31
'date-month-{Y}-{M}'→ setDateFrom YYYY-MM-01, setDateTo YYYY-MM-LL
where LL is the last day of the month (computed via Date trick
new Date(year, month, 0).getDate() — uses month-day=0 to roll
back into the previous month's last day).
- isItemActive recognises when the current dateFrom/dateTo matches
a year or month node so the sidebar selection highlight stays
in sync with the filter store (also when filters are set
externally via the filter bar or URL hydration).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Bulk-move via drag-and-drop. Drop a photo (or multi-selection) on
any folder row in the LeftSidebar and the files move on disk +
photo.folder_id updates atomically.
Backend
- New POST /photos/move accepting { photo_ids, target_id }. The
target_id can be either a Folder id OR a SourceRoot id (the
sidebar exposes source roots today, so the same drag target
needs to resolve either).
- Resolves source roots to their on-disk path and looks up / creates
the canonical Folder row via the existing scan get_or_create_folder
helper, so dedupe + path normalization stay consistent with the
scanner.
- Per-photo loop with shutil.move; per-file failures (target name
collision, missing source, OS error) are collected into a
structured `errors` array and don't abort the batch.
- Skips photos that are already in the target folder so re-drops
are a no-op.
Frontend
- New photos.move(ids, targetId) helper in api.ts.
- LeftSidebar grows a moveDropMutation alongside the existing
discard one. handleDrop dispatches by id prefix:
'discarded' → discard, 'folder-{id}' → move.
- Folder rows now report acceptsDrop and get the same drag-over
highlight as heap drops, in primary tint instead of reject.
- onSuccess invalidates both the photos query and the folders
query so the new folder counts in the sidebar refresh.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The first phase-11 file operation. Lightroom-style inline rename
of a single photo, in place, in its current directory.
Backend (PATCH /photos/{id})
- PhotoUpdate schema accepts an optional `filename`.
- When set, the handler validates: non-empty, no path separators,
no `..`/`.`, target name doesn't already exist in the directory,
source file exists on disk.
- os.renames the file inside its current directory, then updates
photo.filename + photo.filepath atomically. The DB only changes
after a successful rename — a filesystem failure leaves the
rest of the row untouched.
- Other PhotoUpdate fields still apply afterwards in the same
request.
Frontend (RightSidebar)
- Filename is now an editable monospace input above the Title
input. Same draft + commit pattern as title/notes (local draft,
resync on photo.id change, on-blur or Enter commits).
- Esc reverts to the server value.
- Client-side validation mirrors the backend (rejects path
separators and dot-segments) and shows a toast on backend
errors with the FastAPI detail message, then rolls the draft
back so the input matches the still-on-disk filename.
- Removed the old read-only Filename Field from the Basic Info
section to avoid showing the same value twice.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Two related fixes:
1. Prevention — scanner now normalizes paths before lookup/insert
in get_or_create_source_root and get_or_create_folder. Trailing
slashes, redundant separators, and `.` segments all collapse to
the same row. _normalize_path uses os.path.normpath; symlinks
are intentionally NOT resolved so mount paths stay intact for
cross-machine portability.
2. Cleanup — new app/services/cleanup.py runs on backend startup
(idempotent) and merges any pre-existing duplicates left over
from older scanner versions:
- Groups source_roots by normalized path. Picks the canonical
row (preferring one with a non-empty name and the earliest
added_at), re-points child Folder rows via UPDATE, and
deletes the duplicates.
- Same for folders, with photo_count as the tiebreaker. Photos
get re-pointed to the canonical folder via UPDATE.
- Recomputes folder.photo_count from the actual non-discarded
photo membership so the sidebar count matches reality.
Wired into main.py's lifespan handler. On the dev DB this merged
the empty-name "/host/Pictures/MulitaTest/" duplicate that was
showing up alongside the canonical MulitaTest source root.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
GET /folders returns SourceRoot rows (the top-level scan paths
shown in the LeftSidebar tree), but photos.folder_id points to
a Folder row (a directory under a source root), and the photos
list endpoint was matching Photo.folder_id == folder_id literally.
Result: clicking "MulitaTest" in the sidebar sent the source root
id, which never matched any photo, so the timeline went empty
even though the photo_count badge showed 5.
Fix: when the folder_id param matches a SourceRoot, expand it to
every child Folder.id under that root and use IN. Falls back to
the literal match for actual folder ids. If a source root has no
child folder rows yet, returns no photos (rather than the whole
library) so a half-scanned root doesn't accidentally show
everything.
The longer-term cleanup is to deduplicate the source_root /
folder rows the scanner is creating on each rescan, but this
makes the navigation work today.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Pick and add-to-heap were two ways of saying "I want to keep this
one". Merging them: P now toggles the selection's membership in the
active heap. The is_picked flag goes away (orphaned in the DB the
same way is_trashed was).
Backend
- Drop is_picked from PhotoBase / PhotoUpdate / PhotoResponse and
from the photos list filter param.
- Drop the is_picked Column from the Photo model (DB column stays
on legacy installs but is no longer read or written).
- Drop the bulk action 'pick' branch.
- New GET /heaps/{id}/photo_ids returns just the flat string list.
Used by the frontend for fast client-side membership lookups
without fetching full photo records.
Frontend
- New hooks/useActiveHeapMembersQuery.ts → returns
{ activeHeap, memberIds: Set<string> }. Subscribes once at the
Timeline level and passes a derived isInActiveHeap bool down to
each PhotoThumbnail (avoids hundreds of thumbnails subscribing
to the same query).
- PhotoThumbnail: replaces the old check-icon Pick affordance with
a clear basket badge in the bottom-right corner — a small filled
pick-colour pill containing a ShoppingBasket icon — visible only
when the photo belongs to the active heap.
- P shortcut (useKeyboardShortcuts) now toggles membership: if every
selected photo is already a member, it removes them; otherwise it
adds the missing ones. T binding removed (P fully replaces it).
- RightSidebar Pick button is now a Pick / Picked toggle bound to
the active heap. Disabled with a hint when no heap is active.
Shows the heap name in its title attr.
- filterStore drops 'picked' and 'unflagged' from FlagFilter.
FilterBar's flag dropdown is now just Any / Discarded.
- LeftSidebar drops the "Flagged" virtual node (it just set
flag=picked, which no longer exists).
- KeyboardHints: P → "Pick → heap".
- Photo TS type drops is_picked.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Adds the spec §6.10 heaps concept: named photo collections with a
single "active" target for fast keyboard adds. Uses a basket icon
(ShoppingBasket) to visually distinguish heaps from folders.
Backend (routers/heaps.py)
- Replaces the 27-line stub with full CRUD: list (with photo counts
via a single LEFT JOIN), create, patch (rename + set active), delete.
- Add/remove photos endpoints with idempotent semantics: re-adding an
existing member is a no-op, removing a non-member is a no-op.
- Setting is_active=true on one heap clears the flag on every other
heap in a single UPDATE so we maintain the single-active invariant.
- routers/photos.py list endpoint now applies the heap_id filter via
IN-subquery against heap_photos (it was a declared param but had
no filter logic).
Frontend
- New hooks/useHeapsQuery.ts and useFilterUrlSync wires heap_id as
another URL-persisted filter; usePhotosQuery threads it through.
- New components/heaps/HeapsPanel.tsx replaces the LeftSidebar Heaps
stub. Shows the basket icon, photo counts, lets you create heaps
inline, click to filter the timeline, set active via the target
icon, and delete heaps.
- TopBar shows an "active heap" pill (basket + name) so the user
always knows where the next T-press will land.
- KeyboardHints adds T → Add to heap.
T shortcut (useKeyboardShortcuts)
- Reads the active heap from the heaps query cache and the selection
from the photo store at fire time. Adds the selected photos (or the
active photo if nothing is selected) via POST /heaps/{id}/photos.
- Toasts:
- "Added to {heap}: N photos (M already present)" on success
- "No active heap" hint when none is set
- "Nothing selected" hint when there's no selection or active photo
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Adds the destructive-action loop the discard concept needed:
- Click "Discarded" in the left sidebar → activates the discarded
filter; the timeline reloads showing discarded photos.
- DiscardActionBar appears at the top of the timeline only when the
discarded filter is active. Shows the count, a Restore button (when
photos are selected), and an Empty discard pile button.
- Empty action goes through a ConfirmDialog (new tiny reusable modal,
same overlay pattern as AddSourceFolderDialog).
- Restore goes through POST /api/v1/discard/restore.
- DELETE /api/v1/discard/empty now actually os.unlink()s the files
from disk in addition to removing the DB rows. Per-file failures
are logged and reported in the response so a single permission
error doesn't abort the batch.
Other library nodes wired in passing:
- "All Photos" → clearAll()
- "Rated" → setRatingMin(1)
- "Flagged" → setFlag('picked')
- "Discarded" → setFlag('discarded')
- "By Date" left unwired (needs a date-grouping UI)
Single-photo restore via the U keyboard shortcut already worked from
an earlier round, no change needed.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
User-facing labels and code now use "discard" (verb) and "Discarded"
(state/view label) instead of "trash" / "Trashed". The DB column names
stay (is_trashed / trashed_at) so no migration is required — only the
SQLAlchemy attribute names are renamed via Column('old_name', ...).
Backend
- Photo model: is_discarded / discarded_at attributes (DB columns
unchanged).
- PhotoBase / PhotoResponse / PhotoUpdate schemas use the new field
names.
- Photos list endpoint: is_discarded query param, filter logic.
- DELETE /photos/{id} now sets is_discarded; success message updated.
- Bulk action 'trash' renamed to 'discard'.
- backend/app/routers/trash.py renamed to discard.py with renamed
functions and route prefix /api/v1/discard.
- main.py imports and mounts the discard router.
- tasks/scan.py marks missing files as is_discarded.
Frontend
- Photo TS type: is_discarded.
- PhotoThumbnail: shows the trash-can icon when is_discarded.
- RightSidebar: button label "Discard"; mutation field name; local
variable rename.
- TopBar: discardPhotosMutation and "Discard" button; toast text
"Discarded".
- LeftSidebar: virtual node id 'discarded' / label "Discarded".
- FilterBar / filterStore / useFilterUrlSync: FlagFilter enum value
'trashed' → 'discarded'; backend param key is_discarded.
- KeyboardHints: X label "Discard".
- useKeyboardShortcuts: PhotoUpdate field rename, X handler.
- api.ts: /trash routes → /discard, trash export → discard,
bulkUpdate trash field → discard.
Out of scope (intentional): the docker-compose trash_data volume,
backend/Dockerfile mkdir /data/trash, config.py TrashSettings, and
the spec doc — all unused since soft-discard, and renaming them is
churn for no benefit.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The Photo model previously had two near-identical "negative culling"
states: is_rejected (a flag) and is_trashed (a flag plus a file move).
Lightroom users typically use one or the other, never both, and the
file-move semantics of the old trash made it harder to undo. Merging
into a single soft is_trashed flag — file stays on disk, restore is a
flag flip, permanent deletion still happens via DELETE /trash/empty.
Backend
- Drop is_rejected from PhotoBase, PhotoResponse, PhotoUpdate, the
list endpoint filter, and the bulk-action 'reject' branch.
- Add is_trashed to PhotoUpdate so the PATCH path can set it.
- Drop is_rejected Column declaration from the SQLAlchemy model. The
legacy DB column may persist on existing installs but is no longer
read or written; SQLAlchemy ignores extra columns.
- Rewrite DELETE /photos/{id} as a soft trash: just sets is_trashed=
true and trashed_at=now, no shutil.move. Permanent deletion still
goes through the trash router.
Frontend
- Photo TS type drops is_rejected, gains is_trashed.
- X keyboard shortcut now sets is_trashed=true (was is_rejected); U
clears both is_picked and is_trashed.
- RightSidebar Reject button → Trash button (Trash2 icon).
- PhotoThumbnail flag overlay shows Trash2 icon for trashed photos
instead of an X for rejected.
- KeyboardHints relabels X from "Reject" to "Trash".
- filterStore FlagFilter renames 'rejected' → 'trashed'; the params
builder now sends is_trashed=true for the trashed filter (the list
endpoint defaults to hiding trashed photos otherwise).
- FilterBar dropdown / URL sync allow-list updated accordingly.
No data migration: existing rejected photos remain as-is (flag stale)
and effectively become unflagged in the new model. Re-trash from the
UI to bring them into the new state.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Adds GET /photos/{id}/proxy that decodes RAW (rawpy), HEIC (pillow-heif),
and TIFF to a cached full-resolution WebP at /data/proxies/{id}.webp.
Web-safe formats (JPEG/PNG/WebP/GIF) pass through to the original to
avoid pointless transcoding. RAW failures fall back to extracting the
embedded JPEG preview. Mirrors the X-Accel-Redirect pattern from the
existing thumb endpoint.
Also fixes GET /photos/{id}/original to return the correct image/jpeg,
image/png, video/mp4, etc. content types instead of always serving
application/octet-stream, so <img> and <video> tags can render the
file inline rather than triggering a download.
Frontend: adds photos.getProxyUrl() helper in services/api.ts.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
