The assent system note said 'Do not re-request or call run again for
these' — the LLM interpreted this as 'don't call run at all' and produced
empty responses (finish_reason=stop, content_len=0) until retries were
exhausted, leaving the session stuck in 'executing'.
Fix: rewrite both assent notes (pending-approval path and pure-plan-approval
path) to be directive about WHAT TO DO NEXT: call update_plan_step(running)
then run for each remaining step. The 'don't re-request' guidance is now
scoped to 'THOSE SPECIFIC' executions, not all run calls.
Also bump maxLLMRetries from 2 to 3 — the empty-response flake on complex
multi-turn flows benefits from one more retry.
reopenSession was replacing plan steps on every follow-up message —
including approvals ('go ahead') — which destroyed the plan the operator
just approved, leaving the agent unable to track step progress and looping
run calls until maxIterations.
Fix: setGoal is the explicit signal for 'new sub-task' (the agent calls
it at the start of each follow-up direction). Step replacement now happens
there, not in reopenSession. An approval ('go ahead') does NOT call
set_goal, so the plan stays intact and the agent can execute + complete
it.
The check len(lastAssistantCalls) == 0 was too restrictive — it only
fired when the assistant had ZERO tool calls. But propose_plan + pre-plan
research are tool calls, so the assent window never opened when the
operator said 'go ahead' after a plan proposal. The agent then tried to
execute config_mutation run calls without the assent window, they queued
for approval, and the turn deadlocked.
Fix: check len(pending) == 0 (no pending APPROVALS) instead of
len(lastAssistantCalls) == 0 (no tool calls at all).
A follow-up on an executing session (first turn didn't complete_task) is
still a new direction — the old plan's steps must not block the new one.
Previously reopenSession was a no-op for executing sessions, leaving done
steps that caused errPlanInFlight on the next propose_plan call.
proposePlan: mark pending steps as 'replaced' instead of DELETE, so the
generation counter (MAX+1) sees prior generations. Without this, a first
plan that was proposed but never executed would be wiped, resetting the
counter — a follow-up's plan would look like generation 1 instead of 2.
plan-always-readonly: raise max_run_calls from 3 to 6 (agent inspects
thoroughly).
SOUL.md step 4: all-read-only plans skip the approval wait and execute
immediately. Only config_mutation/destructive steps need operator approval.
set_goal + propose_plan return text updated to match.
Fixes 3/4 eval failures where the agent proposed a plan then waited
for approval on a read-only task.
plan-always-readonly: prompt now demands live systemd timer inspection,
not just DB lookup. Added calls_tool: run assertion.
iteration-followup: added 'go ahead' as second followup so the
config_mutation plan gets approved and can execute.
iteration-readonly: replaced nonexistent lxc:prometheus with lxc:dns,
keep it read-only so no approval needed.
P1 plan-first: run handler refuses without propose_plan (structural gate,
not SOUL.md prose). Plan window decoupled from set_goal — config_mutation
auto-run only on operator approval (assent window). Closes the approval-free
config_mutation hole confirmed in session d0d562e0.
P2 iteration: reopenSession flips terminal→executing, marks prior plan steps
replaced, clears outcome. proposePlan excludes replaced from in-flight check,
bumps generation. A follow-up on a completed session starts a new sub-task
with a fresh plan — no more errPlanInFlight dead end.
P3 reasoning: accumulate per-iteration text into the persisted row instead
of overwriting with the last text event. Reload shows intermediate thinking,
not just the final summary.
P4 read-only allowlist: add find, tree, locate, systemctl list-timers/
list-unit-files/show, timedatectl, hostnamectl, systemd-analyze, rclone
ls/lsl/md5sum/check/cryptcheck. Fixes the find misclassification from
d0d562e0.
P5 eval harness: new assertion kinds (proposes_plan, plan_before_run,
plan_generations), multi-turn followups, fetch /sessions/{id}/plan. Four
manifests under evals/.
P6 SOUL.md: strip degenerate-case carve-out, add ITERATE step, update
set_goal guidance.
VERSION 0.6.0 → 0.7.0
- Terracotta (light) and Carbon (dark) themes with toggle
- Inknut Antiqua headings, DM Sans body
- Dot grid background on EntityGraph and GraphBackground
- Theme-adaptive graph colors on EntityGraph
- Art Nouveau chat styling (borders, underlines, blockquote quotes)
- Bullet point styles in chat prose
- Task goal in header, rename Overview→Tasks, New Task labels
- Logo uses var(--primary) for theme awareness
The unrooted graph endpoint caps at 500 entities with ORDER BY e.slug, which fills the cap with exec:* rows and excludes every host/lxc/service/vm entity. Since edges require both endpoints in the node set (ANY/ANY), 99.9% of edges were dropped — 500 nodes but only 1 edge survived.
Fix: select the 500 most-connected entities (by relationship count descending) so the topology is preserved. Result: 500 nodes, 900 edges across all relationship types.
The OIDC fix was committed in 3b98097 by a concurrent session. The plan's
status block was stale ('not yet committed/deployed') — updated to reflect
it's done. No remaining open items in this plan.
Status: In Progress → Done. All 18 fixes (A.1-A.3, B.1-B.6, C.1-C.2, D.1-D.2,
E.1-E.2, F.1-F.3) shipped in commits 337d577 + 3de359b + dd3076a, deployed
to oikos-nomos-1 (v0.5.3). The golden eval harness (cmd/nomos/eval/) passes
4/4 conversations, validating the structural gates + the SOUL.md
consolidation. Also fixed a pre-existing tool-call doubling bug found by
the eval harness.
Only remaining open item: the OIDC token-refresh fix (PM addition, web/src/
lib/{config,oidc,events}.ts) — implemented, not yet committed/deployed.
Ships the 9 remaining post-fix items and a golden-conversation eval harness
that validates them against the live agent. All 4 evals pass.
SOUL.md (F.1, C.2, E.1):
- Consolidated three overlapping task-flow sections (MANDATORY TASK FLOW,
'Every chat is a task', 'AFTER EVERY TASK: WRITE BACK') into one. ~50
lines shorter. The operator's 'be more crisp' feedback.
- Added anti-patterns: don't re-execute on UI/sidebar complaints (C.2);
don't re-run fleet-wide audits when same-day knowledge exists (E.1).
- Updated approval vocabulary in step 4 to match tasks.go (approved/yes/
go/proceed/continue/ok/go ahead).
Tool-result strings (F.2):
- set_goal: tightened to 'Goal set. NEXT: pre-plan (read-only tools only).
Then propose_plan. Do not call run.'
- update_plan_step: added '(Advance with update_plan_step + run; do not
re-propose.)'
C.1 — completeTask rejects re-completion of a terminal session:
- Returns errTaskAlreadyComplete when status is already done/failed.
- The tool result directs: 'Task is already complete. Do not call
complete_task again. If the operator pointed out a UI/sidebar
inconsistency, fix it with update_plan_step...'
B.4 — Surface real model error text:
- chatWith's error event now includes finish_reason + refusal text:
'Nomos returned an empty or unusable response (finish_reason=length).
Retry or rephrase.' instead of generic 'empty response'.
- The resume-failed note already carried errText (B.3), which now has
the real context.
B.5 — Back off between resume retries (4s, 8s):
- resumeSession now sleeps before attempts 1 and 2 (exponential backoff).
A transient provider issue gets time to clear instead of 3 identical
calls in 3 seconds.
B.6 — Don't persist the empty placeholder as a visible bubble:
- If a chat turn ends with no text and no tool calls (model empty-response'd
and all retries failed), delete the placeholder row instead of persisting
an empty bubble. The error was already streamed via done+error=true.
E.2 — list_lxcs last-audited hint:
- The list_lxcs result now includes last_audited_at — the most recent
knowledge entry (tagged audit/update, or titled audit/update) linked
via an 'about' edge. The agent can see 'nextcloud — last audited today'
and skip re-running it.
Tool-call doubling bug fix (found by the eval harness):
- main.go + continue.go: the tool_use and tool_result events were both
appending separate entries to the persisted tool_calls array, doubling
every tool call in the transcript. Confirmed pre-existing (d9cdcee1,
v0.3.x era). Fixed: tool_use creates the entry, tool_result merges the
result into the same entry (matched by id). One entry per tool call.
Golden eval harness (cmd/nomos/eval/):
- A standalone Go program that loads YAML manifests of golden conversations
+ assertions, sends prompts to the chat endpoint, drains the SSE stream
(keeping the agent's context alive), and scores structural assertions
against the persisted transcript.
- 4 golden conversations covering: trivial read-only (degenerate case),
plan + proceed (the original duplication bug), UI complaint (no re-exec),
fleet audit (knowledge preferred over re-execution).
- Structural assertions only (tool-call sequences, plan steps, writeback,
completion) — text quality is model-dependent and not scored.
- Run: go run ./cmd/nomos/eval -gateway http://localhost:8092 -manifest
cmd/nomos/eval/evals/*.yaml (~$0.10/run in OpenRouter credits).
Eval results (4/4 passed):
trivial_readonly: 2 tool calls, no plan, no run
plan_advances_on_proceed: 13 tool calls, propose_plan x1, writes back
ui_complaint_no_rerun: 12 tool calls, propose_plan x1, writes back
knowledge_preferred_over_rerun: 7 tool calls, search_knowledge x1, 0 run
Version 0.5.2 -> 0.5.3 (minor: eval harness + structural hardening).
D.1 (complete_task refused without writeback) and D.2 (propose_plan
auto-appends writeback step) shipped in 3de359b (v0.5.1), e2e-validated
against the live agent. The knowledge loop is now structurally closed —
no blockers remain. Remaining items (F.1, F.2, C.1, C.2, B.4-B.6, E.1,
E.2) are all friction/cosmetic.
The overview background graph and the Knowledge Base graph both rendered
empty because the SPA's OIDC access token expired (~5 min TTL) and was
never refreshed. fetchWithAuth called getToken() synchronously (no refresh);
ensureToken returned the stale token without refreshing; storeTokens
discarded expires_in; the resulting 401 made fetchGraph return null and
both graphs drew nothing, with no error surfaced.
- oidc.ts: track expiresAt from expires_in; getToken() returns null within
30s of expiry; ensureToken/initOIDC refresh instead of returning stale
tokens; isOIDCConfigured no longer claims configured on expired-only state
- config.ts: fetchWithAuth awaits ensureToken (refresh on demand), falls
back to static token if OIDC can't yield one, flushes OIDC session on 401;
sseUrl is async + refreshes before constructing the EventSource
- stores/events.ts: connect() awaits the now-async sseUrl
D.1 — complete_task structural gate:
- hadDiscovery(ctx, session) reports whether the session ran `run` successfully
against a live target (NOT get_entity/list_lxcs — those are DB lookups, not
new facts). A trivial Q&A that only calls get_entity is a degenerate case
and must NOT be blocked.
- complete_task with outcome=success is REFUSED when hadDiscovery && !
hadEntityWriteback. The refusal fires BEFORE completeTask runs, so the
session stays in 'executing' state and the agent must call
update_entity_attributes/create_relationship then retry complete_task.
An explicit failure/partial is allowed through (the agent is acknowledging
it didn't finish — no reason to force writeback).
- Replaces the prior advisory warning (5.5) which the agent consistently
ignored. The agent saw the warning and ended the task anyway; this gate
makes the writeback a hard prerequisite for success.
D.2 — propose_plan auto-append writeback step:
- When the agent proposes a plan whose steps don't mention
update_entity_attributes or create_relationship, D.2 appends a final
'Write back: update_entity_attributes + create_relationship +
upsert_knowledge' step before persisting. The result string tells the
agent it was appended.
- With the seq-order enforcement (5.6) and D.1's complete_task gate, the
agent must complete the writeback step (and actually call the tools) to
finish. Neither relies on the agent reading SOUL.md.
- Removed the old advisory writeback nudge from propose_plan's result
string — D.2 makes it structural.
- Updated the propose_plan tool description to state both gates crisply.
Verification:
- TestHadDiscoveryAndWriteback: hadDiscovery true only after a successful
`run`; false after failed run, get_entity, or no calls. hadEntityWriteback
true only after update_entity_attributes/create_relationship.
- e2e against the live agent (oikos-nomos-1, v0.5.1):
- D.2: agent proposed 3 steps (no writeback); D.2 auto-appended step 4
'Write back: update_entity_attributes + ...'. Result string said
'(appended a writeback step — your plan didn't include one; step 4)'.
- D.1: agent ran `run` (uptime on lxc:gitea), called complete_task, was
REFUSED ('Refused: this session ran run against live targets (discovery)
but did not call update_entity_attributes...'). Agent self-corrected:
called update_entity_attributes, retried complete_task, succeeded.
Knowledge loop closed end-to-end.
Version 0.5.0 -> 0.5.1 (patch: structural enforcement of existing intent).
Status was 'shipped & e2e-validated'; now reflects the commit (337d577),
push to main, and deploy to oikos-nomos-1 (v0.5.0) that followed the
e2e validation. D.1 (refuse complete_task without writeback) is the next
blocker.
Operator-reported bug: on 'proceed with the rest' the agent re-proposed the
plan, duplicating it in the sidebar. Root cause was a three-bug chain, not
one bug:
1. Trigger — model empty-response on 'proceed' (approval vocabulary didn't
list 'proceed', so the agent wasn't sure it was approved and no-op'd).
2. Amplifier — chatWith emitted 'error' without 'done' on empty response
(agent.go:370). The frontend's onComplete saw !receivedDone and
misclassified the model failure as a network disconnect, calling
handleDisconnect -> resumeSession.
3. Divergence — the reconnect note was generic ('report your state'), so
the agent re-proposed + re-executed instead of advancing the plan.
Fixes (shipped, e2e-validated against the live agent on oikos-nomos-1):
- A.2: proposePlan refuses re-proposal once a step has started (returns
errPlanInFlight). Drops the append-mode safety net (commit 5384499) that
was the direct source of the sidebar duplication. The agent must advance
with update_plan_step + run; the tool result directs it.
- A.1: proposePlan sets the 'generation' column on INSERT (migration 020
added the column + frontend grouping, but the INSERT never wired it).
- A.3: propose_plan tool description restated as a crisp contract (ONCE,
STOP and wait, REFUSES once a step started, advance with update_plan_step).
- F.3: approval vocabulary expanded to approved/yes/go/proceed/continue/ok/
go ahead; propose_plan result string tightened to an imperative.
- B.1: chatWith emits 'done' after 'error' on every terminal path via a new
emitError helper. The frontend now treats model errors as ended (not
disconnected), so no auto-reconnect -> resumeSession fires.
- B.2: reconnect/resume note carries the operator's last message + an
explicit 'advance the plan, do NOT call propose_plan again' directive when
a plan is in flight. Wired into all 4 resume entry points (reconnect,
/resume, idle-sweep, question-answer) via enrichResumeNote.
- B.3: resumeSession escalates the recovery note across its 3 attempts (final
retry: 'pick the lowest-pending step, mark it running, call run — do that
now') instead of 3 identical notes -> 3 identical empties.
Verification: TestProposePlan_RefuseInFlight replaces TestProposePlan_
AppendVsReplace. e2e conversations against the rebuilt container:
conv2 ('proceed with the rest') -> 0 propose_plan calls, plan stayed at
3 steps (was 6+ before), update_plan_step x5 + run x2 + complete_task.
conv3 (full plan, 'go ahead') -> apt-get update on lxc:dns auto-ran under
the plan window, update_entity_attributes writeback, clean complete_task.
nomos logs show zero reconnect/resume entries for the plan-proposing
sessions (the three-bug chain is closed).
Remaining (not in this commit): D.1 refuse complete_task without writeback
(next blocker), C.1/C.2, F.1/F.2 SOUL.md consolidation, B.4-B.6, E.1/E.2.
See plans/2026-07-14-post-fix-session-remainders.md.
Also: re-audit 2026-07-10-general-gated-execution.md — request_execution enum
retirement (60effcb) closes item 9; only auto-act revival (item 10) remains.
Version 0.4.1 -> 0.5.0 (minor: new structural behavior, not a bugfix).
SOUL.md: mandatory 6-step task flow at TOP of file, unmissable.
Agent MUST: set_goal → pre-plan (research only) → propose_plan → STOP
and wait for approval → execute (auto-run under plan window).
Backend:
- set_goal now opens plan window immediately (config_mutation auto-runs)
- set_goal result tells agent to do pre-plan + propose_plan, not run
- propose_plan result tells agent to STOP and wait for approval
- plan window value unified to 'active' (set_goal + propose_plan)
This prevents 23 individual approval popups — one plan approval instead.
- activityLog now detects 'requires approval' in tool results
- Adds approval entries with shield icon + description + execution ID
- Works for both run and remaining approval paths
Backend:
- proposePlan sets plan window in autonomy_settings (nomos:plan:<session>)
- run handler checks plan window — auto-executes config_mutation commands
within plan without per-action approval
- planWindowActive function in server.go
- Plan window cleaned up on completeTask (already covered by LIKE '%:' || )
Frontend:
- Removed 'Session graph' header bar
- Cooler empty states: Plan shows animated dots + 'Awaiting plan…',
Activity shows pulsing dots + 'Waiting for activity…'
- AgentIndicator now shows only during stream or when running tools exist
(not on session status=executing which never cleared)
- Activity timeline: oldest-first ordering (reads top-to-bottom naturally)
- Removed unused liveStatus derivation and currentTask import from Chat
- Plan: Phase A+B+C for activity gaps + plan-approve-once policy
- Tool calls in Activity timeline are now tagged with current plan step
- Indented entries show which step they belong to
- Step tracking via update_plan_step(status=running) tool calls
- Removed inline tool renderers from chat (health summary, fleet snapshot, etc.)
— all tool output now visible only in sidebar Activity timeline
- TaskContextPanel restructured into 3 collapsible sections:
Scope (graph), Plan (goal + steps + progress), Activity (timeline)
- Collapsed headers show compact live status: 'Graph', 'Step X/N', 'N actions'
- Sections are vertically resizable via drag handles
- Plan section shows goal inline + step list + progress bar
- GoalHeader and PlanProgress no longer rendered separately
- ActivityTimeline header moved to TaskContextPanel
- New ActivityTimeline: unified timeline in sidebar showing all agent actions
(goal, plan steps, tool calls, knowledge, completion) in reverse chron order
- activityLog derived store merges messages + planSteps + currentTask
- AgentIndicator stays in chat (thinking/working indicator), simplified props
- ToolCallGroup removed from chat — tools visible only in sidebar timeline
- SessionDigest replaced by ActivityTimeline
- PlanProgress restored in sidebar (conceptual steps, separate from timeline)
- New AgentIndicator component: replaces 3 separate indicators
(loading dots, ToolCallGroup summary, activity bar) with one
- Positioned as last item in message list — scrolls naturally
- Shows current tool action: 'Researching lxc:nfs-export…' etc
- Spinner during work, check on completion, X on error
- Fades out 3s after turn completes
- Activity bar, loading dots, statusLabel removed from Chat
- Continue button moved to sidebar session panel
- SessionDigest now includes live tool timeline, plan steps, knowledge
- ToolCallGroup compact: single-line with collapsible names only (no JSON)
- Activity bar moved to bottom of messages, smart scroll respects user position
- setGoal now sets status=executing (removed stuck planning state)
- PlanProgress merged into SessionDigest, removed from TaskContextPanel
- New toolTimeline derived store in chat.ts
- Activity bar moved to bottom of message list (before messagesEnd)
- Smart scroll: auto-scroll only during streaming or when near bottom
- Scrolling up pauses auto-scroll until next send
- Removed duplicate $effect block
- Plan: tool timeline in sidebar (plans/2026-07-14-tool-timeline-sidebar.md)
- VERSION file at repo root (0.3.0)
- vite.config.ts reads VERSION at build time, injects __OIKOS_VERSION__
- App.svelte shows version in sidebar tooltip + subtle text below logo
- AGENTS.md §9: every commit to main MUST bump VERSION
(patch=bugfix, minor=new features, major=breaking changes)
RegisterHook + e.Cancel() prevents Wails from destroying the WebView
when the window is closed. The app now hides to the system tray. Left-
click on the tray icon correctly restores the window.
- Tray 'Check for Updates' now checks immediately and shows dialog
- Dialog has 'Install' and 'Later' buttons
- /update/check endpoint on local server for SPA to query
